Bohler S790 Microclean for Hobs
2022-08-19 13:50:02
jiangxingTools
2730
Bohler S790 Microclean for Hobs
Material composition of S790: C-1.29, Si-0.6, Mn-0.30, Cr-4.20, Mo-5, V-3, W-6.30
Standard: 1.3345, HS6-5-3C, EN ISO 4957
Performance feature of Gear Hobs with S790:
Toughness & Ductility: high
Wear Resistance: good
Compressive strength: good
Edge Stability: good
Grindability: high
Hot Hardness (red hardness): good
相關文章
-
Manufacturing Steps for Gear Shaper Cutter
Manufacturing Steps for Gear Shaper Cutter1, turning2, surface rough grinding3, hobbing 4, heat... - PA20° Pre-shave Gear Hobbing with Module m2.25
- Deep Counterbore Type Shaper Cutters with GB 6081
- PA20° Pre-shaving Gear Hob with Module m6
- PA20° HSS M2, M35 Gear Cutting Hobs with Semi-Topping Tooth Profile
- Spray Forming Material HSF825K, HSF835
- PA20° DP9 Standard Gear Cutter Hob with BPⅡ
