PM-HSS S390 for Involute Gear Hob and Gear Hobber Cutter
2023-07-08 11:37:36
jiangxingTools
2549
PM-HSS S390 for Involute Gear Hob and Gear Hobber Cutter
This grade is PM steels with many positive usage properties, S390 is with good red hardness, compressive strength and wear resistance.
Chemical composition: C-1.64, Cr-4.8, Mo-2.0, V-4.80, W-10.40, Co-8
Standards of PM-HSS
Hanrdess of S390: HRC 66-68
The application of PM-HSS S390 is used for involute gear hobs, gear hobber cutter, gear hobbing tools, chain sprockt hob, worm wheel hobs and gear shaper cutters.
相關(guān)文章
-
PA20° Profile DIN3972 Standard Pre-grind Gear Hob with Module m1
PA20° Profile DIN3972 Standard Pre-grind Gear Hob with Module m1Tooh profile is according to GB, DIN... - PA20° DP16 Standard Involute Gear Hob with BPⅡ
- PA15° Module Gear Hob
- PA30° DIN5480 Involute Spline Gear Hob Cutter with Module m1.25
- PA20° HSS M2 Material DIN3972 BP2 Module DP Involute Gear Hob Cutter with TiN Coating
- Timing Pulley Hob for HTD 3M
- Powder Metallurgy HSS ASP 2078
